Ovens & Dryers
20 min dwell × 1.5 m/min → 30 m process zone
Configure the oven from part load, dwell time and heating capacity
Required process length follows dwell and belt speed. Heat load and zones follow the same configuration.
Industrial oven / dryer configurator
Part load → dwell → length → heat load · zones · safety · manufacturer rules
Zones, construction and safety reachable below.
Dwell time & belt speed
Process-zone length = belt speed × required dwell (illustrative).
Required dwell
Conveyor speed
Calculated process length
30 m
1.5 m/min × 20 min · zones redistribute this length
Illustrative Mercura configuration using example manufacturer-defined rules. Your catalogue, formulas, limits and approvals would drive a production deployment. Does not imply LEL or process-safety certification.
Mercura does not guarantee process outcomes. It runs your manufacturer-defined load, dwell and heating rules while sales is still sizing the equipment.
Configuration chain
From part load to a valid oven quote
Load, dwell and heating capacity constrain length, zones and safety gates.
- 01
Part
Geometry and mass set the thermal duty baseline.
- 02
Temperature
Profile and setpoints from manufacturer bands.
- 03
Throughput
Parts per hour drives line speed assumptions.
- 04
Dwell
Required time in zone vs available length.
- 05
Oven length
Zone count and conveyor pitch from parametric rules.
- 06
Heating
Burner or element capacity vs calculated load.
- 07
Zones
Heat-up, soak and cool sections resolve together.
- 08
Safety gate
Manufacturer safety options when encoded.
- 09
Quote
Valid thermal package priced in-session.
Why quoting gets hard
Why oven quotes need engineering callbacks
Undersized heating
Element duty below calculated load — found after layout.
Dwell shortfall
Line speed cannot achieve required soak time.
Zone mismatch
Cool-down section omitted until thermal review.
Before / after
The same technical sale, a different commercial path
Before
- Part data emailed
- Dwell estimated offline
- Heating sized by habit
- Length debated after sketch
- Safety options added late
With Mercura CPQ
- Part load entered in the sales flow
- Dwell and throughput checked live
- Heating capacity enforced
- Zone layout resolves in-session
- Valid oven quoted without rebuild
Capabilities
Relevant Mercura capabilities
See your thermal equipment logic in Mercura
Bring your catalogue, formulas, limits and exceptions. Mercura executes them consistently during selling.
Not ready to talk yet? Watch a quick product walkthrough or ask a question below.
Request a CPQ demo